new product sb120a thru sb160a vishay general semiconductor document number: 88862 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 schottky barrier rectifier features ? guardring for overvoltage protection ? very small conduction losses ? extremely fast switching ? low forward voltage drop ? high frequency operation ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. mechanical data case: do-204al (do-41) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: color band denotes the cathode end primary characteristics i f(av) 1.0 a v rrm 20 v to 60 v i fsm 35 a v f 0.50 v, 0.70 v t j max. 125 c, 150 c do-204al (do-41) notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms maximum ratings (t a = 25 c unless otherwise noted) parameter symbol sb120a sb130a sb140a SB150A sb160a unit maximum repetitive peak reverse voltage v rrm 20 30 40 50 60 v maximum rms voltage v rms 14 21 28 35 42 v maximum dc blocking voltage v dc 20 30 40 50 60 v maximum average forward rectified current at 0.375" (9.5 mm) lead length (fig. 1) i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 35 a voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction temperature range t j - 65 to + 125 - 65 to + 150 c storage temperature range t stg - 65 to + 150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol sb120a sb130a sb140a SB150A sb160a unit maximum instantaneous forward voltage (1) 1.0 a v f 0.5 0.7 v maximum reverse current at rated v r (2) t a = 25 c t a = 100 c i r 0.5 ma 10 5.0
new product sb120a thru sb160a vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88862 revision: 19-may-08 2 note: (1) thermal resistance junction to lead p.c.b. mounted 0.375" (9.5 mm) lead length ratings and characteristics curves (t a = 25 c unless otherwise noted) thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol sb120a sb130a sb140a SB150A sb160a unit typical thermal resistance (1) r ja r jl 100 30 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode sb140a-e3/54 0.34 54 5500 13" diameter paper tape and reel sb140a-e3/73 0.34 73 3000 ammo pack packaging figure 1. forward current derating curve figure 2. maximum non-repetitive peak forward surge current 0 0.25 0.5 0.75 0 50 75 25 100 125 150 175 1.0 a v erage for w ard c u rrent (a) lead temperat u re (c) sb120a - sb140a SB150A & sb160a resisti v e or ind u cti v e load 0.375" (9.5 mm) lead length 0 10 30 20 50 40 10 1 100 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics instantaneo u s for w ard c u rrent (a) 100 10 1 0.1 0.01 instantaneo u s for w ard v oltage ( v ) 0.4 0.2 0 1.2 0. 8 0.6 1.4 1.6 1.0 sb120a - sb140a SB150A & sb160a t j = 150 c t j = 125 c t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle instantaneo u s re v erse c u rrent (ma) 1 10 100 0.01 0.001 0.1 20 0 100 40 60 8 0 percent of rated peak re v erse v oltage ( % ) sb120a - sb140a SB150A & sb160a t j = 125 c t j = 25 c t j = 75 c
new product sb120a thru sb160a vishay general semiconductor document number: 88862 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) typical junction capacitance j u nction capacitance (pf) 10 1 100 100 1000 10 0.1 re v erse v oltage ( v ) sb120a - sb140a SB150A & sb160a t j = 25 c f = 1.0 mhz v sig = 50 m v p-p typical transient thermal impedance 0.01 10 1 100 10 100 1000 0.1 1 t - p u lse d u ration (s) transient thermal impedance (c/ w ) do-204al (do-41) 1.0 (25.4) mi n . 1.0 (25.4) mi n . 0.205 (5.2) 0.160 (4.1) 0.107 (2.7) 0.0 8 0 (2.0) dia. 0.034 (0. 8 6) 0.02 8 (0.71) dia.
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
